A pressure gauge is an analogue device for measuring pressure of liquids and gases. It does this with the use of a curved Bourdon tube, that straightens under pressure. This is linked to a pointer which displays on a graduated dial face and turns clockwise as the pressure rises. Pressure gauges can be measured in many different pressure units such as psi and bar over a 270-degree scale.
S.M. Gauge supply a range of Pressure Gauges, widely used across many industries and suitable for taking readings in oil, water and gases. Below is a selection of many different types we can offer. Please click through to see the oil, water or gaseous suitability of each gauge. In addition to our range of standard ‘off the shelf’ instruments we can also supply to your required specification including non-standard connections and even customised dials featuring your company logo.
Please see our enquiry form or call our sales team on +44 (0)117 9654615 to discuss your requirement.
Showing all 12 results
Industrial GaugesFor use with oil, water or any other liquid which will not attack brass or bronze, also suitable for air or inert gases below 25 bar (excluding Oxygen or Acetylene). Specification: Diameter: 100 ....
Liquid Filled GaugesHeavy duty stainless steel case suitable for adverse service conditions where pulsation or vibration exists. For use with oil, water or any other liquid which will not attack brass or bronze, also s ....
Small Diameter GaugesSuitable for gaseous (excluding Oxygen or Acetylene) and liquid media that will not obstruct the pressure system or attack copper alloy parts. Specification: Diameter: 40, 50, 63 & 80mm R ....
Duplex Pressure GaugeDuplex Pressure Gauges are designed with two independent pressure measuring systems built into one gauge. These are often used on filters, pumps and valve, rail braking systems and other specialised ....
Stainless Steel Pressure GaugesHeavy duty, all stainless steel construction process pressure gauge. Suitable for almost all measuring mediums and operating conditions, also safe for corrosive environments. Suitable for air or ine ....
Safety Pattern GaugesThese gauges are generally used within the gas industry are are designed with operator safety in mind. In case of a bourdon tube rupture no projectiles will blow out from the front of the gauge. S ....
Low Pressure Capsule GaugesCapsule gauges are suitable for indication of low vacuum/pressures below 0.6 bar, to be used only on dry air or gases. Specification: Diameter: 63, 100, 160 & 200mm Ranges: from -600 mbar ....
Regulator GaugesThis gauge type is generally for use with gas bottle regulators but can be used on any high pressure gas, that is compatible with brass and Phosphor Bronze. Specification: Diameter: 50mm Rang ....
HVAC GaugesFor use with oil, water or any other liquid which will not attack brass or bronze, also suitable for air or inert gases below 25 bar (excluding Oxygen or Acetylene). Specification: Diameter: 100 ....
Traditional Brass GaugesWe manufacture, repair, refurbish and calibrated traditional brass cased pressure gauges for many of the countries historical rail societies and steam engine enthusiasts. Our instruments are hand bu ....
Large Diameter / Boiler GaugeThis type of gauge is commonly seen on boilers or where access is difficult. The large dial size can make this ideal for reading at distance. Can be used on many different mediums such as oil, wa ....
Grout/Pulp Separator GaugesOriginally designed for tunneling and boring purposes, the Standard Grout Probe is now used extensively throughout all industries. This instrument is compatible with most applications. Nominal s ....
Pressure Gauge FAQs
What is a pressure gauge?
A pressure gauge is a device that measures pressure in a compressed gas or liquid.
Pressure gauges are used across many industries. Everyday examples of use include measuring tyre pressure or blood pressure. In industry, gauges monitor pressurised systems whether it’s a refrigeration system in food processing or equipment in a nuclear power plant.
Standard pressure gauges take a reading of pressure against ambient atmospheric pressure.
These would be used in boilers and all kinds of compressed air systems. Vacuum gauges and absolute gauges take readings against an absolute vacuum. Equipment for atmospheric, deep vacuum or altimeter readings would need to measure absolute pressure.
Other types of gauge include digital display pressure gauges which can make readings easier or gauges with analogue dials which are linked directly to the gauge.
What is calibration?
Calibration is the process of testing and then correcting the accuracy of measuring equipment.
Measuring equipment will lose accuracy over time and calibration is vital to ensure the reliability of recordings. For any industry relying on the precision of measurements, for example, pressure and temperature readings, a trusted calibration service is essential.
How often should my gauge be calibrated?
Pressure gauge re-calibration is determined by the end user. Generally, the more critical the industry the more often the gauge will be calibrated. It would usually be written into the site procedure or manual. After our years of experience annually is certainly most common we come across.
What are the standard process connections used to connect a pressure gauge to my application?
We have an information page dedicated to gauge process connections, click here to visit.
The most common process connection used in the UK is BSP (British Standard Pipe) which has a parallel thread and a spigot on the bottom. The pressure tight seal is made using a bonded washer.
The other commonly used process connection is NPT (National Pipe Thread) which is used mostly in other countries, particularly the USA. A pressure tight seal is made upon a tapered thread (generally a PTFE tape).
Process connections are most commonly available in 1/8″, 1/4″, 3/8″ and 1/2″ in both BSP and NPT sizes*:
* BSP and NPT process connection sizes do not relate to the physical size of the connection or thread.
We have a process connection information page which provides full details on the most commonly used threads including their physical dimensions.
Absolute, Gauge and Differential Pressure – What do they mean?
Absolute, Gauge and Differential are completely different methods of recording pressure.
- Gauge pressure is the deviation of a particular pressure away from atmospheric pressure. It can be positive or negative.
For example, a dial pressure gauge whose pointer reads zero when no pressure is applied would usually measure gauge pressure. Gauge Pressure is by far the most common measurement process used worldwide.
- Absolute pressure is a measurement of pressure relative to a complete or absolute vacuum. It will always be positive.
For example, a barometer measures absolute pressure.
- Differential pressure is the measurement of any pressure relative to another pressure. It can be positive or negative.
For example, a manometer used to measure the pressure drop across an air filter is measuring differential pressure.
What is the Accuracy class?
The Accuracy class is a way of measuring acceptable levels of error in pressure equipment. It is given as a percentage of the scale reading span. For example, an accuracy class 4 on a 10 bar pressure gauge would indicate that readings may deviate by +4% or +0.4 bar across the measuring range.
Why are there yellow levers on the pressure gauge casing?
For pressure ranges under 363 psi (25 bar), gauges tend to have something called a filling plug. These plugs come with small yellow levers which are closed when delivered. You must ensure you open these when fitting so that pressure does not build up in the case. This pressure causes unacceptable high accuracy deviations for the gauge.
What is the difference between a standard pressure gauge and a safety pattern gauge?
Safety pattern gauges are generally used in the gas industry and are designed with operator safety in mind. They are constructed with an additional solid baffle wall welded between the dial and the measuring system. The case also has a safety glass window and a back wall that can blow out completely in the case of a rupture.
When should a restrictor be used?
Restrictors are used to regulate the flow of sudden changes in pressure, sometimes known as “spikes”. The restrictor is fitted into the pressure gauge socket and forces the fluid through a small space restricting the flow of fluid to the element. By protecting the sensor from sudden pressure fluctuations, you will enhance the performance and longevity of your pressure gauge.
What is ATEX?
ATEX is a combination of two EU directives detailing what equipment is to be used in a workplace with a potentially explosive environment: The 94/9/EC Equipment Directive and the 99/92/EC Workplace Directive.
ATEX is a synonym taken from the French title of the 94/9/EC directive “Appareils destinés à être utilisés en Atmosphères Explosibles”.
What is a diaphragm gauge?
Diaphragm gauges are often used where clogging can be an issue. The diaphragm does not have a small inlet hole and therefore the medium does not compact and causes a blockage. There are several different types from flanged to hygienic versions with a nut and liner.
How many PSI in 1 bar?
There is 14.5038 psi to 1 bar pressure.
How many bar in 1 PSI?
There is 0.0689476 bar to 1 psi pressure.
What is glycerine?
Glycerine is a food grade clear viscous fluid. It is generally used in gauges to help stabilize the pointer when being mounted on or around the pressure source.
Why have your gauge liquid filled?
The liquid fill inside the gauges head acts as damping for the moving parts. As a result, any damage caused by vibration, pulsation and general wear and tear can be prevented.
What does f.s.d mean or f.s?
F.S.D or F.S is relating to the accuracy of the gauge, this stands for full-scale deflection or full-scale. It means the accuracy (C.L or K.L) of the gauge is of the full gauge range.
What does the C.L or K.L stand for on the dial?
C.L is the accuracy class of the pressure gauge, this is more commonly seen in the U.K. K.L is the same meaning but generally seen more across Europe.
What is a pressure and vacuum gauge called?
A gauge with negative and positive pressure is called a compound gauge.
How do I protect my pressure gauge from spikes, surges, or sudden pressure release?
There are several different options to help with a pressure spike. The easiest way is to fit an internal restrictor. This is a small screw with a very fine hole to restrict speed the pressure enters the gauge.
What gauge helps with clogging?
Diaphragm and Grout gauges are from use with clogging media. The diaphragm acts as a wall between the process and the bourdon tube.